Cinque Terre

 

 

Bushra Hosni Musa
 
Applied Science Department
Assistant. Prof.
 
 

 This email address is being protected from spambots. You need JavaScript enabled to view it.

     

 

B.Sc . in Laser science 2004 M.Sc . in materials science 2007 Science degrees Assistant lecturer 28-2- 2007 Senior lecturer 22-12- 2010 Prof assistant 18-9-2016 Supervision /9 project of an undergraduate student from 2008 to 2016

 

height="30"/> Google Scholar Profile

 Researcgate Profile

 Publons Profile

 ORCID iD

 scopus

 

• B.Sc. laser science M. Sc. Material science Thesis Title: Study mechanical properties of polymer blend using thermoplastic polymers

polymer , Polymer blends, composite materials
 

 

WEX-HIL: Design of a Wireless Extensible hardware-in-the-loop real-time simulator for electric vehicle applications 
YK Jung, F Mak, F Qingele, I Alzahid 
2016 IEEE Frontiers in Education Conference (FIE), 1-9

Design of a Real-time Simulator Capable of Hardware-in-the-loop Simulation for an Automated Collision Prevention (ACoP) System for an Autonomous Electrical Vehicle 
Balkees M.Deya , Rafah A.Nassif & Bushra H. Musa , "Study of the mechanical properties of composite material based on (UPE/NBR) blend”, Iraqi Journal of physics ,Vo.5, No.7 ,PP(229-233),Iraq, 2008. Enass M.Hadi ,Bushra H.Musa ,Rafah A.Nasif “ Study of Some Mechanical Properties for Composite Material Reinforced with Ribbon", Journal of the College of Basic Education, No. 56, pp. (693-700), Iraq, 2009 Bushra Hosni Musa,” Study diffusion and thermal conductivity properties of(UPE / NBR) blend reinforced with a ceramic powder ", Diyala Journal of Pure Sciences Vol 6, No. 4,PP.(136-148), 2010 Awham M. H., Sadeer M. M. and Bushra H. M. ,” Study of The Wear Rate of Some Polymer Materials In Different Conditions” , Eng. & Tech. Journal, Vol. 28, No.16, Iraq , PP.( 5165-5170 ), 2010 Bushra H.Musa , Rafah A.Nasif & Enass M.Hadi , "Study of the Mechanical properties for unsaturated polyester reinforced by natural fibers” , Journal of Al-Nahrain University , Vol.13 , No.3 ,PP.(65-68) , Iraq , 2010. Bushra Hosni Musa, “Preparation and study of some mechanical properties of a (U-PTE / NBR) polymer blend ", Journal of the College of Basic Education, Volume 17, No. 68, pp. (794-783), Iraq, 2011 Bushra Hosni Musa ,” Study Some of Mechanical Properties and Effects of immersion in Solution of (Epoxy /Unsaturated Polyester) Blend Which Reinforced with Glass Fiber” Eng.& Tech .Journal, Volume 29, No. 10,PP.(464-473), Iraq 2011 Liqaa A. Hameed & Bushra H.Musa , “ Influence of Gamma Radiation at Low Dose on Some of Mechanical |Properties of (HDPE/HIPS) Blends” ,Eng.& Tech .Journal .Vol.31, Part(B),No.5, PP(621-632) Iraq,2013 Bushra H.Musa , “ Effect of Glass Powder on Some Mechanical Properties of Polymer Matrix Composite Material “ ,Journal of Al.Nahrain University , Vol.17, No. 2 , PP.(108-115), Iraq, 2014. Bushra H.Musa , “Effect of Bio-Fiber Waste Addition on Specifications of Epoxy Composite “,Iraqi Journal Of Applied Physics , Vol. 11, No. 1, pp. (21-24) , Iraq, 2015. Bushra H. Musa , “ Influence of treated kenaf fibers on the mechanical behavior for thermoset-based polymer composite , “ Journal of college of education , No.3, PP.(315-328), 2015 Ban A. Yousif , Bushra H.Musa , “ Characterization of Epoxy composites Reinforced by Waste Bio-Fibers “ , IJAP, vol. (11), no. (3), pp. 15-18 , 2015 Bushra. H.Musa, “Effect of Reinforcement with Kenaf Fibers on Some Mechanical Properties of Unsaturated Polyester Resin”, Diyala Journal of Pure Sciences,vol.12,No.3,PP.(42-53),2016 Bushra Hosni Musa, “Mechanical Properties of Polymer Composite Reinforced by Agricultural Wastes , Diyala Journal of Pure Sciences,Vol.13,No.4,PP.(212-224) ,2017. B.H. Musa, B.A. Yousif, “Diffusion Study of Different Types of Water in Polymer Composite Reinforced with Chicken Feathers Fibers, Eng.& Tech .Journal, Vol.53,special number 1,pp.(133-139),2017 Bushra Hosni Musa ,Rami Joseph Aghajan , Muaed Faik abd al Majed”Thermo-Mechanical Properties of Unsaturated Polyester Reinforced with Silicon Carbide Powder And with Chopped Glass Fiber “Journal of University of Babylon, Pure and Applied Sciences, Vol.(26), No.(4),PP(141-147), 2018 Mahmood M. Barbooti, Bushra H. Musa, Q.A. Salloom , D. Abdul-Aziz “ Preparation and study of properties of polyvinyl chloride-scrap tire composite for civil applications “ , J. Mater. Environ. Sci., Volume 9, Issue 1, PP.( 285-292) ,2018 Elham Talib abd alhussain ,Bushra Hosni Musa, Hassan Hadi Hussain , “Study of some Optical and electrical properties of polyvinyl alcohol adoped with FeCl3”, Eng.& Tech .Journal .Vol.36, Special number , PP(49-56) Iraq,2018 Bushra H. Musa, Nahida J. Hameed, " Study of the mechanical properties of polyvinyl alcohol/starch blends", Materials Today: proceeding Volume 20, Part 4, Pages 439-442,2020

 

polymer chemistry , polymer and composite lab , metal and property of materials lab , ceramic lab and higher education lab
 

.

 

Thanks and appreciation from: 1- Head of the university of technology to participate in the exam committee in the material science branch ( 2008) 2- Head of applied science department to do experiments laboratory composite materials (2009) 3- Head of the applied science department in the works of the department (2009) 4- Head of the Department of applied Science to participate in a symposium on the science of the materials branch (the role of universities and scientific research in developing the reality of the glass, ceramic and refractory industries in Iraq) 2012 5- Head of applied science department to participate in the symposium of the Materials Science (Modern Technology in Thermal Insulation Materials for Buildings and Establishments) 2013 6- Head of Minister of Education and Scientific Research for the scientific and knowledge achievements 2013 7- Nanotechnology and Advanced Materials Center to participate in the Symposium (Nanomaterials in Biomedical Applications) 2013 8- Nanotechnology and advanced materials center to participate in the symposium (Nanomaterials in Biomedical Applications) 2013 9- Nanotechnology and Advanced Materials Center to participate in the First International Conference on Laser Applications and Advanced Materials (2014) 10- Head of the applied science department to participate in the symposium of the Materials Science Branch (the role of laboratory investigations in strengthening the infrastructure of Iraq) 2015 11- Head of the University of Technology to publish three research papers during the two academic years (2013-2014) and (2014-2015) 12- Head of the applied science department to work with more than Committee2015-2016 13- Head of the applied science department 201914-

 
Top